? digital view group ltd 2010 | www.digitalview.com hd-3000s single channel hd-sdi adapter the hd-3000s is the depopulate version of hd-3000 by supportng signal chan - nel input and output. the hd-3000s converts sd/hd-sdi (sd, hd and 3g) signal to hdmi for driving hdmi monitors. the hd-3000s provides re-clocked loop through outputs for daisy chaining multple monitors or other equipments to the same hd-sdi source. it also supports embedded audio. fully compliant with the smpte 259m-c, smpte 292m, smpte 424m, 425m standards. hd-3000s connected to svx-1920 supported mode : features 576i50 (pal) 480i60 (ntsc) 1035i60 (4:2:2) 1035i59.94 (4:2:2) 1080p30 (4:2:2) 1080p29.97 (4:2:2) 1080p25 (4:2:2) 1080p24 (4:2:2) 1080p23.98 (4:2:2) 1080psf30 (4:2:2) 1080psf25 (4:2:2) 1080psf24 (4:2:2) 1080psf23.98 (4:2:2) 1080i60 (4:2:2) 1080i59.94 (4:2:2) 1080i50 (4:2:2) 1080p60 (4:2:2) 1080p50 (4:2:2) 720p60 (4:2:2) 720p59.94 (4:2:2) 720p50 (4:2:2) 720p30 (4:2:2) 720p29.97 (4:2:2) 720p25 (4:2:2) power requirements : +12vdc 5%, 2.5w 1. supports 1.5gbits & 3gbits bit rate input signal support. 2. single channels input port supported. 3. hd-sdi re-clock loop through output 4. hdmi (v1.3) x 1 output port 5. stereo embedded audio support 6. on-board power on/of switch 7. afd (actve format descripton) support
mechanical drawing 3d drawings (sldprt) save tme and efort for your system volumetric analysis design. includes jpg fle previews. please download at htp://www.digitalview.com/ac - cessories/hd-3000s available resources > instructon manual > revision control documentaton** > firmware upgrade instructon** > mechanical drawing ** available upon request ordering optons p/n 416016440-3 hd-3000s p/n 426006600-3 hdmi to lvds cable, 460mm p/n 420000900-3 hdmi cable, 2 meter asia 16th floor millennium city 3, 370 kwun tong road, kwun tong, hong kong t : (852) 2861-3615 usa 18440 technology drive, morgan hill, ca 95037, usa t : +1 (408) 782-7773 europe 6 marylebone passage, london, w1w 8ex, uk t : +44 (0) 20-7631-2150 hd-3000s single channel hd-sdi adapter connector defnitons j1 sd/hd-sdi input j3 sd/hd-sdi re-clock loop through output cn1 rs-232 & i2c control connector cn2 reserved for programming use cn3 reserved for programming use cn4 external i/o connector cn5 reserved for programming use hdmi1 hdmi output hdmi1a alternate hdmi output pp1 power input (alternate) pp3 power input s1 alternate power on/of switch connector sw1 power on/of slide switch sw3 no functon gnd ground blade led1 status led led2 status led led3 status led led4 status led 124.8 [4.91] 43.1 [1.70] 10.5 [0.41] 20 [0.79] 5 77.6 [3.06] 1.6 [0.06] 13.1 [0.52] 53.6 [2.11] 53.8 [2.12] j1 led1 j3 cn5 cn3 gnd hdmi1a sw3 hdmi1 led3 cn2 cn1 cn4 pp1 s1 sw1 pp3
mouser electronics authorized distributor click to view pricing, inventory, delivery & lifecycle information: digital view: ? 426006600-3? 4160164xx-3
|
